Dive Board



My OpenDive version

My OpenDive version

by druss on Jan 5th, 2014 19:39 PM

Hi,
First of all I want to say to the Dive creator, Stefan : Good Work ! Very impressive.
I really like the concept. HMD with a decent resolution, at a very low price.

I want to share with you my version of the lens holder : https://plus.google.com/u/0/photos/1140 ... 2712821089

It seems to work fine.
Vertically, the holder is guided by the teeth. The holder cant rotate, so it's perfectly scare.
Horizontally, each step moves the lens by 1.5mm. I think that will allow an enough adjustment ?

I will share you the 3d files if you want..

:)

ps : sorry for my bad english !!

druss

Posts: 6

Joined: 05.01.2014


Re: Lens holder version

by Diskun on Jan 16th, 2014 21:44 PM

Looks nice! I would be grateful if you could upload the complete STL files.

By the way, nice delta printer. I'd like to upgrade my Prusa i3 eventually, but deltas look incredibly complicated to build.

Diskun

Posts: 5

Joined: 16.01.2014


Re: Lens holder version

by Diskun on Jan 17th, 2014 18:05 PM

BTW the OpenDive modification the OP has used can be found here: http://www.thingiverse.com/thing:93460
The only thing left would be the custom lens holders.

I think it is far easier to print: http://www.youtube.com/watch?v=01cIQGQX5pU

Diskun

Posts: 5

Joined: 16.01.2014


Re: Lens holder version

by druss on Jan 18th, 2014 16:28 PM

"Diskun" wrote:
Looks nice! I would be grateful if you could upload the complete STL files.

By the way, nice delta printer. I'd like to upgrade my Prusa i3 eventually, but deltas look incredibly complicated to build.


Hi Diskun,
I have not access to my PC until thuesday, so I will share my stl files with you later.
I used the 93460 thingiverse design and I copied some ideas for my own design. I will show you my modifications.

I started with a prusa first, but the delta construction is not as difficult as you think. The hardest part was to get my electronic work (i bought a cheap chinese one..).

druss

Posts: 6

Joined: 05.01.2014


Re: My OpenDive version

by druss on Jan 20th, 2014 18:57 PM

Here is my complete version : http://www.thingiverse.com/thing:230446

druss

Posts: 6

Joined: 05.01.2014


Re: My OpenDive version

by Diskun on Jan 23rd, 2014 20:31 PM

Thanks, it has some pretty interesting ideas, like the toothed lens holder, as soon as I get the lens I'll try your design too.

Diskun

Posts: 5

Joined: 16.01.2014


Re: My OpenDive version

by druss on Jan 25th, 2014 01:27 AM

@ Diskun
I really encourage you to print different sizes of teeth and try them before print the all opendive.
The good fitting of the part depend on your printer and its settings.

You might want to print the lens holder and try to print only the block and adjust its width (see my ALL.skp file).

;)

druss

Posts: 6

Joined: 05.01.2014


STATISTICS


Total posts: 2768


Total topics: 540


Total members: 24430


Newest member: Daniel G.